Check These Out on Thingiverse

I have posted all the .STL files for printing these pie cuts on thingiverse.  


https://www.thingiverse.com/thing:5377170


I was pleasantly surprised to find out that I am not the only one who had this idea.  Both hakdat and Joe46 got the idea before I did.

https://www.thingiverse.com/thing:2306034

https://www.thingiverse.com/thing:5161351

Comments

Post a Comment

Popular posts from this blog

And now for something completely different...

Image
I recently hosted a party and received many gifts. In response I decided to send out thank you cards. Of course, I can't do anything the easy way. So, I took some inspiration from Japanese wood block printing and started working on this. Obviously, I have some work to do, but for a first print in the completed block set, I find it encouraging.  So here's the process: Laser printer transfer - create your design and print it on a laser printer. Use acrylic medium to glue your image face down to your lino block. Let the medium dry overnight. In the morning dampen the paper and rub it off the block with your fingers or a damp cloth. Linoleum carving - using various chisels remove all the areas which are not supposed to hold ink. First key block test - I had to make sure I did it right. From the full set you can see that the pigments are going down in multiple layers. In hindsight I would cut the ocean as one block and use ...
Read more

Solidworks - Easy Resin Print Supports

Image
     The biggest issue I have had printing small parts is bed adhesion. LycheeSlicer comes with some powerful automatic tools for building supports, unfortunately they don't know which surfaces are important and they raise the part off the bed surface which ruins one very valuable reference surface.     My solution has been to painstakingly apply custom supports in Solidworks, by mimicking the automatic tools of LycheeSlicer.  But last night I developed a better method. 1) Create a feature which will easily break from your printed part. 2) In a new sketch plane on the build plate side of your part, offset the profile of the part.  Replace all the sharp edges of the offset with radii.  I find the simplest tool for this job is the sketch fillet.  Exit the sketch. 3) Select your support feature and add a curve driven pattern.  Play around with the settings until it looks right, and you should have something like this: 4) Build a raft a...
Read more

Come Visit the Aperture Science Center

Image
     I went shooting with my friend the other day, and we played a little game I like to call Precision Poker.  The way this game works is you staple a deck of cards to a target board.  Each shooter takes a turn with 5 shots.  If all 5 shots hit different cards then that is the shooter's dealt hand.  If the shooter misses the target board entirely or hits the same card twice, or hits a card in someone else's hand, those shots are considered automatic discards.  Each shooter has the opportunity to shoot up to 5 more rounds according to the cards he wishes to discard. You may choose the distance at which the game is played.  With a standard size deck, I like to play at 50 yards.        So, long story short, I trounced my friend.  He went first, and I spotted for him.  I picked out a royal flush for him, but he missed.  He missed every card I called.  I felt pretty bad.  And then I shot my royal ...
Read more